Firmware dump for the Acer Nitro AN517-41 gaming laptop on Compal board LA-K851P, stored as a 16 MB raw binary. The size corresponds to a 128 Mbit SPI flash chip. Compal marks its boards with LA-xxxxP codes printed on the PCB, which should be compared before use. The image is written with an external programmer to recover a machine that will not post, loops on power or was bricked by a failed update. Read and save the existing chip first, because serial and system data are stored in the same flash.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bioshub. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →