Full 16 MB SPI dump for Lenovo LCFC board NM-D211 revision 1.0, with the Management Engine region cleaned and marked as tested working in the name. A cleaned ME region lets the image be flashed onto a board without carrying over the previous machine's ME state. Write it with an SPI programmer onto a 16 MB chip, after reading and saving the original contents, which hold serial and system data you may want to restore. Confirm NM-D211 and the revision on the PCB before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @BiosSupport2006. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →