Modified BIOS dump for the Dell OptiPlex 5050 desktop with the Management Engine region cleared, marked as tested by FST Fix. The 16 MB binary matches a 128 Mbit SPI flash chip. A cleaned ME region is used to fix problems such as fan running full speed, slow boots or ME errors after chip corruption. Write it with an external programmer. Save the original chip contents first, since the Dell service tag and system data stored there may need restoring afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →