Generic 4 MB binary called outimage, the default output name many flash programmer and BIOS editing tools give a saved or modified image. Nothing in the name identifies the device, board number or firmware version, so treat it as unverified until its contents are inspected. The size fits a 32 Mbit SPI chip such as a 25-series SOIC8 part. Look inside with a hex editor for model strings, back up the original chip with your programmer, and only write it when the capacity and platform clearly match.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @Laptopdesktopbios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →