Another 4 MB binary saved under the generic outimage name, usually written out by a programmer or BIOS modification tool. Device, board and firmware version are not identified in the name, so its contents should be checked before trusting it. The size corresponds to a 32 Mbit SPI flash chip. Open it in a hex editor to look for model strings, compare it with your own read of the chip, back up the original first, and confirm that the chip on the board has the same capacity as the image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @Laptopdesktopbios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →