Firmware dump for a Konka television built on the P50-M6TV9.0 main board, configured for a 1366x768 panel resolution, packed as a 2.85 MB RAR archive. Such dumps are used to reflash the board memory with a programmer when a TV boot-loops, stays in standby or shows the wrong picture after corruption. The panel resolution matters: firmware for another resolution will produce a garbled image. Confirm the board marking and the panel type, back up the original chip and check the chip capacity before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @led_software. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @led_software | 18 Apr 2025 | Open file on RM Schematics |
| @hashmielecom | 19 Apr 2025 | Open file on RM Schematics |
| @tvsoftwareworld | 11 Apr 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →