PCHC ICP 13.0.0.1004 PRD

BIOS .bin 4.00 KB Shared

PCHC firmware for the ICP (Ice Point) chipset, version 13.0.0.1004, production build, 4 KB. The PCHC module is a small chipset controller component bundled into the Intel Management Engine region alongside PMC firmware. On its own it is not a flashable image; it is selected inside Intel Flash Image Tool when generating or modifying a full SPI image. Check the platform generation before use, and read and archive the original flash contents with a programmer before rewriting the chip.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.

All sources (2)

The same file was posted more than once. If one link is dead, try the next.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files