Firmware dump for a Philco board marked H24L, revision 2.1, compressed in a 7z archive of 466 KB containing a BIN file. Given the naming it is likely a TV main board flash image, used to recover a set stuck on logo, in a boot loop or showing no image. Extract with 7-Zip, then write the file to the memory chip with a programmer. Read and save the original contents first, confirm the chip capacity matches the extracted image size, and check the board label and revision match.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @abgm_manutencao_bios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
| @oficinacomputadores | 10 Nov 2023 | Open file on RM Schematics |
How to open a .7z file
High-ratio compressed archive, often used for large BIOS collections.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →