Firmware image for a Positivo Q464B laptop using the EM H8316 78B mainboard, revision V1.0, delivered in a RAR of about 3.18 MB. It is meant for recovering a board with a damaged BIOS by reprogramming the SPI flash with an external programmer and clip or after desoldering the chip. Always dump the original contents first so serial data and settings can be restored, compare the board code on the PCB with the one in the name, and check the dump length against the chip capacity before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 2 Jan 2023 | Open file on RM Schematics |
| @bartonarquivos | 27 Oct 2025 | Open file on RM Schematics |
| @bartonarquivos | 26 Nov 2025 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →