Firmware for a Positivo Unique laptop with a Celeron N4200 processor, referencing boards J14IM6-T811 and J14IM2X with DDR3 memory, in a 523 KB RAR archive. The small size suggests a compact image, so check its length against the flash chip before writing. Such dumps are written to the SPI flash with a programmer to recover a notebook that does not power on properly. Compare the board code printed on the PCB and back up the original chip first, since variants differ.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 14 Jan 2021 | Open file on RM Schematics |
| @Satale_bios_esquemas_Laptop | 2 Mar 2021 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →