BIOS dump for an HP ProDesk 600 G3 desktop, saved as a 16 MB binary; the MD in the name likely refers to the motherboard image, though that is not certain. The size corresponds to a 128 Mbit SPI flash chip, so check the chip marking on the board before writing. Technicians use such images to recover a corrupted BIOS with a programmer like the CH341A. Always read and save the original chip first, because it holds unit-specific data such as serial number and network MAC address that a donor image will not carry.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @vinafix_bios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →