Firmware set for the Compal Q1VZC board LA-8941P, revision 1.0, containing a 4 MB and a 1 MB image and marked as tested OK. Compal uses the LA-prefixed number for its motherboard designs, with Q1VZC as the project code. The two sizes usually mean a main BIOS chip and a smaller second flash, often for the EC. Write each image to the chip with matching capacity using an SPI programmer. Back up both original chips first and confirm the PCB shows LA-8941P revision 1.0.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 8 Feb 2024 | Open file on RM Schematics |
| @generalbios | 11 Feb 2024 | Open file on RM Schematics |
| @generalbios | 6 Mar 2024 | Open file on RM Schematics |
| @generalbios | 14 Jul 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →