Panel EDID dump naming both QD14XL20 and B141XG13, the two LCD part numbers used in the Dell D610. The file is 128 bytes, a single base EDID block describing the panel to the video controller over DDC. Since the name lists two panel codes, check which one is actually installed before relying on it and inspect the data in an EDID viewer. Technicians write such files into the panel's I2C EEPROM to fix blank or misdetected screens; always read and archive the original contents first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →