A 128-byte EDID image for the QD15TL04 panel at revision 02, labelled for a Dell Q810 system. It contains one base EDID block that the panel reports to the video controller to identify itself and its timing modes. Technicians write it into the panel's serial EEPROM to cure lost or damaged identification data, such as a blank screen or an incorrect native resolution. Since panel revisions can differ, confirm both the part number and the Rev 02 marking on your panel and keep a backup of the existing data.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →