Raw 8 MB binary named as an output image for a Quanta ZAA project. Neither the laptop brand nor the model is stated, so the board must be identified independently. Quanta uses short three-letter codes, often seen in DA0-style board numbers. An 8 MB image normally matches a 64 Mbit SPI flash chip, and a different chip size will not take it. Read and save the original chip contents first, and confirm that your board's Quanta project code is ZAA before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @efibios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →