Binary file of 128 bytes whose name gives only the token R61e and no panel model, revision or vendor. That length equals a single EDID base block, so it most likely holds display identification data, but the name alone cannot confirm the exact source. Open it in a hex editor first: a valid EDID begins with the fixed header 00 FF FF FF FF FF FF 00 and carries a readable manufacturer code and checksum. Compare that code with the label on the actual panel and back up the original EEPROM before writing anything to it.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →