Raw 32.0 MB read of the flash chip at board position U367; the name gives only the reference designator, with no device or board. The size points to a 256 Mbit SPI chip or a similar memory. It most likely comes from a board where firmware is split across several chips, perhaps alongside a U366 read. Without the source board the dump cannot be matched safely, so use it only when you can confirm the exact board and chip it was taken from.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @L9BCM2MdAgNjNDk1. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →