Firmware dump for the Wistron-designed Redwood B MLK board 14274-1, labelled with the part code 475W5 and marked as tested working. The name also notes 1.8 V, which indicates the flash chip runs at 1.8 volts, so a programmer with a 1.8 V adapter is required to avoid damaging it. The RAR archive is around 8 MB. Before writing, back up the existing chip contents, verify the board number on the PCB, and confirm the image size matches the capacity of the installed SPI flash or it will not fit.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →