Raw 8 MB binary firmware image for a board identified as S133A, revision 2.0. No brand or device model is given in the name. The 8 MB size corresponds to a 64 Mbit SPI flash chip, which is the usual target for writing such a dump with a CH341A or similar programmer. Before flashing, confirm that the PCB carries the S133A Rev 2.0 marking and that the chip capacity matches. Always read and keep a backup of the original contents so the board can be restored if the image misbehaves.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bioshub. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →