Firmware for the Samsung S20A300B monitor, marked with version code m-A320B0GAA-1007.0 and model code LS20A300BSLZD, with the name noting it as 100% working. The archive is small at 134 KB, consistent with a monitor controller flash or EEPROM image. It is used to restore a display that will not start, shows no picture or has corrupted settings, by writing the chip with an SPI or EEPROM programmer. Read and save the original chip first, and check the image size matches the chip before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 23 May 2021 | Open file on RM Schematics |
| @BiosSchematicWorld | 26 Oct 2021 | Open file on RM Schematics |
| @pepeelectronica | 20 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 23 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 26 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →