Second copy of a 4.00 MB firmware dump labelled for the Samsung RV511, with no board number or version listed. Comparing checksums with the first file shows whether the two are the same or come from different boards. The image suits a 32 Mbit SPI chip and is written with tools such as CH341A, RT809 or TL866. Before relying on it, match the Samsung board marking on the PCB, save a backup of the existing chip, and verify the programmed data to avoid a brick.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →