Samsung LTN173KT03 EDID image for a 17.3-inch notebook LCD; the brand is misspelled in the name. The 256-byte binary holds the panel identification and timing data the laptop reads over DDC. Reprogramming the panel EEPROM with it addresses an undetected display, incorrect native resolution or a screen shown as a generic monitor. Confirm the KT03 code on the rear sticker, read and save the original data first, and check the written contents with a read-back using a serial EEPROM programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @laptop_bios_schematic | 28 Dec 2020 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 27 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 29 Apr 2025 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 14 Jul 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →