Samsung 156AT05-H01 panel EDID image, named without the usual LTN prefix, likely the LTN156AT05-H01 15.6-inch LCD. It is a 256-byte dump of the panel identification EEPROM read by the laptop over the DDC lines. Writing it back resolves cases where the screen shows nothing, runs at a wrong resolution or appears as an unknown monitor. Read and keep the original data before flashing, make sure the H01 suffix matches the panel sticker and confirm the checksum is valid after programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @laptop_bios_schematic | 28 Dec 2020 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 27 Jan 2025 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 14 Jul 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →