Firmware for the Samsung 1932NW LCD monitor, contained in a 93.5 KB RAR archive, with no board number, revision or flash type mentioned in the name. A file like this is normally written to the memory chip on the scaler or main board when the monitor will not show an image, locks up or loses its settings. Program it with an external programmer such as a CH341A after reading and saving the original contents, and make sure the dump size and chip type match the board you are repairing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 25 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 2 Dec 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →