Firmware dump for a Samsung 2033 LCD monitor, read from a 25L1005 serial flash, a 1 Mbit SPI chip that matches the 128 KB size. The file has no extension, so the programmer software may need it loaded as a raw binary. It is used to restore a monitor whose scaler firmware is corrupted, with symptoms like no image, endless standby or a stuck power LED. Desolder or clip the chip, save the original read before writing, and make sure the chip on your board is the same type and capacity as the source.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 21 Feb 2017 | Open file on RM Schematics |
| @abgm_manutencao_bios | 10 Jul 2019 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →