Compact 57.1 KB RAR archive holding firmware for the Samsung 2033 LCD monitor. The name does not list the contents, but such small packs typically contain the scaler flash dump and sometimes an EEPROM image as well. Technicians use them to reprogram the monitor main board when the unit fails to start, shows no picture or loses its settings. Unpack and check the file sizes against the chips fitted on your board, read and keep the original contents, then write with a programmer such as a CH341A.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 21 Feb 2017 | Open file on RM Schematics |
| @biosarchive | 21 Feb 2017 | Open file on RM Schematics |
| @biosarchive | 4 Feb 2018 | Open file on RM Schematics |
| @led_software | 17 Jan 2019 | Open file on RM Schematics |
| @led_software | 22 Sept 2019 | Open file on RM Schematics |
| @biositechyangiyer | 19 May 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →