Firmware dump for the Samsung BX1931N monitor, in a 208 KB ZIP archive. The 512 token in the name most likely points to a 512 Kbit flash part, although that is not confirmed. Monitor controller firmware like this is used when a display shows no image, will not leave standby, has a dead OSD or reboots in a loop after the flash corrupts. Locate the SPI or EEPROM chip on the main board, read and save its current contents with a programmer, and check that the image size matches the chip before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 30 Dec 2018 | Open file on RM Schematics |
| @IT_SERVICE_WORLD | 29 Oct 2019 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →