Raw firmware dump for a Samsung LA32C400E4 television, an 8.00 MB binary file that corresponds to a 64 Mbit flash memory. Television repair technicians use such a dump to restore a set stuck in standby, looping on the logo or failing after a bad update, by writing it to the main board memory chip with a programmer. Confirm the model and the chip type on the main board, check that the image size equals the chip capacity, and save the existing contents before erasing anything.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →