Panel firmware for the Samsung LT140WF1-SPB1 14 inch display used by Dell, with Dell part reference 0MJ2P noted in the name, sized 8.00 KB. At 8 KB this is larger than a plain EDID block and is likely a full panel EEPROM or timing controller dump. It is used to restore a panel that shows no image or is not recognised after data corruption. Read and save the original chip contents first, confirm the panel label and Dell part number, and make sure the image size matches the EEPROM.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ITHINKHS | 8 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →