EDID image for the Samsung LTN101NT06-202 panel, a 10.1-inch class netbook-size model going by the LTN101 prefix. The file is 256 bytes: one base EDID block and one extension. It carries the identification and timing data that the system reads over the DDC lines. Reprogramming it into the panel EEPROM can bring back a correct native resolution after corruption or a panel swap. Inspect it with an EDID decoder to verify the checksum. Check that the panel sticker shows the same suffix, and save the original data before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →