EDID image for the Samsung LTN101NT07 10.1 inch netbook panel, 1XX revision family, stored as a 256 byte binary. The EDID tells the system the native resolution, timing and panel identity at startup. Flashing a correct copy repairs a netbook screen that stays black, is detected as a generic monitor or shows the wrong mode. Confirm the panel label matches the model and revision, back up whatever is currently stored in the EEPROM and write the data using an I2C programmer or EDID utility.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →