Samsung LTN116AT01 panel EDID in a 128-byte binary, one standard base EDID block. The panel keeps this data in a tiny serial EEPROM so the graphics chip can read its identity, native resolution and timings at startup. A corrupted block can cause no picture, a distorted image or a wrong resolution, and reprogramming it from a known-good dump is the usual remedy. Confirm the panel label matches exactly, save what is on the chip now, and check the EDID checksum with a viewer before and after writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →