Samsung LTN140AT01 EDID dump, a 14-inch notebook LCD, with G03 as the panel suffix. The 256-byte binary stores the display descriptor data read over DDC to set native resolution and timings. It is used to restore a panel EEPROM after corruption causes no picture or a wrong mode. The suffix matters because variants of the same model can carry different data, so compare it with the sticker, save the original contents and verify the written image before reinstalling the panel.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @laptop_bios_schematic | 28 Dec 2020 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 14 Jul 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →