Samsung LTN140AT02 panel EDID image, a 14-inch notebook LCD; the trailing 0 in the name is an unclear suffix. The file is 256 bytes and contains the display descriptor data read by the graphics controller over DDC. Technicians flash it to the panel EEPROM when the screen is no longer detected or the resolution is wrong after data loss. Because the suffix is ambiguous, compare the full part number on the panel label, save the current EEPROM content and verify the checksum after writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @laptop_bios_schematic | 28 Dec 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 14 Jul 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →