Samsung LTN140AT21 LCD panel EDID image, with 801 appearing as the panel suffix or revision in the name. The 256-byte file carries the display identification and timing data that graphics hardware queries through the DDC bus at startup. It is used to restore a panel whose EEPROM has been wiped or damaged, which typically causes no picture, wrong resolution or an unrecognised display. Program it with a serial EEPROM programmer, read and back up the chip first, and verify the panel label matches the LTN140AT21 variant.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →