Samsung LTN140AT22 14-inch panel EDID with the P01 suffix, 256 bytes long. The image restores panel identification when the EEPROM on the display has been erased or corrupted, a fault that shows up as a black screen, no native resolution or a generic display device. Write it with an EEPROM programmer and clip, then read it back to compare. Revision suffixes can change timing data, so make sure the panel label matches P01, and keep a copy of the existing chip contents before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →