EDID contents for the Samsung LTN141W1-L04 LCD panel, with no host laptop named in the file. The 128-byte image is a single base block holding vendor, product and timing information that the panel delivers over the DDC lines. It is used to repair panels whose EEPROM has been erased or corrupted, a fault that often leaves the internal display undetected. Match the full part code including the L04 suffix on the panel sticker, back up the original chip, then program with an I2C-capable tool and verify.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →