Samsung LTN141W3-L01 EDID binary for a 14.1-inch widescreen notebook panel, 256 bytes in size. It holds the display identification and timing data the laptop reads over the DDC lines when starting. Technicians program it into the panel's serial EEPROM to recover a screen that shows nothing, runs at the wrong resolution or appears as a generic monitor. Verify the L01 suffix on the panel sticker, read and save the existing chip contents, and confirm the checksum after writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (8)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @pepeelectronica | 23 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 27 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 26 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 31 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →