Samsung LTN150XB-L03 EDID dump, for a 15-inch XGA class notebook LCD, 256 bytes in size. It contains the panel identification block, timings and vendor data that the graphics chip reads over the DDC bus. Technicians write it to the small EEPROM on the panel when a corrupted image leaves the display dark or running at an incorrect mode. Match the L03 suffix against the panel sticker, back up the original contents and use a programmer that supports 24-series I2C EEPROMs.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →