EDID dump for the Samsung LTN154P4 15.4-inch panel, revision L02, saved as 256 bytes. It contains the identification and timing block that the laptop graphics controller reads over I2C at startup. Technicians load it into a programmer to fix displays that show nothing or run at a fallback resolution after the panel EEPROM was corrupted. Open it in an EDID viewer to confirm the decoded model and checksum, compare the panel sticker with LTN154P4-L02, and back up the original data before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →