EDID dump for a Samsung LTN154X3-L01 LCD panel, 256 bytes in raw binary form. The name carries only the panel model and its L01 revision suffix. Panels store this data in a small I2C EEPROM, and the laptop reads it to learn the native resolution, timings and vendor identity. Rewriting it with an EEPROM programmer fixes a blank screen, a wrong resolution or a panel that is not detected after the chip was corrupted. Read and save the existing contents before writing, and check that the panel label shows the same revision.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →