EDID for the Samsung LTN154X3 panel in its L0A revision, a compact 128-byte binary. Other catalogued dumps cover L01 and L03 of the same 15.4-inch model, so match the suffix on your panel carefully, as timing data can vary by revision. The image is written to the panel serial EEPROM to fix a blank screen, a wrong default resolution or a generic monitor entry. Check the file in an EDID viewer before use, keep a backup of the existing chip, and read back after programming to verify.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →