Samsung LTN156AT01 EDID data, 256 bytes, for a 15.6 inch laptop LCD panel. The binary is written to the panel EEPROM to restore identification and timing information that the laptop reads at boot. It helps when a display gives no image after power-up, appears as an unknown monitor or runs at the wrong resolution. Since several LTN156AT01 sub-versions exist, compare the full label on the panel, save the original EEPROM content first and use an EDID utility or I2C programmer to write it.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →