Samsung LTN156AT01 panel EDID with the A01 revision suffix, 256 bytes long. The image includes the standard 128-byte EDID base block and an extension block describing the panel's native mode and timing. Restoring correct EDID fixes faults such as no display, a generic monitor in the OS or missing native resolution after a panel change. Use an EEPROM programmer on the panel's I2C chip or a software EDID writer. Match the panel model and suffix, verify the checksum, and keep a backup of the original data.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →