EDID dump for the Samsung LTN156AT01-H01 15.6 inch notebook panel, provided in 256 bytes. The data identifies the panel to the graphics controller and defines its native resolution and timing parameters. Technicians write it back when a laptop shows no image, reports an unknown display or picks a wrong resolution after the panel EEPROM was corrupted. Check that the H01 suffix matches the sticker on the panel, read and keep the original contents, and program it using an I2C programmer or EDID utility.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →