Samsung LTN156AT02 panel EDID labelled Bremen, 256 bytes of raw binary data. Bremen is likely a project or platform code tied to the laptop the panel came from; it helps separate this dump from the plain LTN156AT02 file. Technicians flash such data into the panel serial EEPROM to cure a blank display, a missing native resolution or an unidentified monitor in Device Manager. Before writing, compare the bytes against a backup of the current chip and check that the panel sticker matches the stated model.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @acodis_lcd_datasheets_EDID | 25 Jun 2023 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →