EDID dump for the Samsung LTN156AT15 15.6 inch notebook panel, revision C03, as a 256 byte .bin file. The EDID block stores manufacturer ID, native resolution and timing information read over the DDC lines when the laptop starts. Reprogramming it solves cases of a blank screen, a generic monitor entry or a wrong default mode. Since C03 and other suffixes may differ in data, check the panel sticker first, save the original EEPROM contents and then program with an I2C capable programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →