EDID dump for the Samsung LTN156AT15 15.6 inch LCD, version C04, in a 256 byte binary file. Panel EDID holds the timing descriptors, native resolution and vendor ID that the system reads during startup. Writing a correct image restores a panel that is detected as generic, shows a wrong mode or stays dark due to EEPROM corruption. Different suffixes such as C03 and C04 can carry differing data, so check the sticker on the panel, back up the chip contents and program carefully with an I2C capable tool.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →