Display EDID binary for the Samsung LTN156AT17 15.6 inch laptop screen, 256 bytes in size. The name gives no revision suffix, so compare against the full label on the back of the panel before use. EDID data identifies the panel and its supported modes to the laptop, and restoring it fixes cases of no picture, incorrect resolution or an unknown display. Read the existing EEPROM on the panel first and keep a copy, then program this image through the DDC lines with an EDID tool or I2C programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →