EDID image for the Samsung LTN156AT18 panel, revision C01, a 15.6 inch notebook display, provided as a 256 byte BIN file. The data describes native resolution, timing and manufacturer identification read by the graphics driver over the DDC bus. A corrupted EDID can cause a blank screen or a generic monitor entry, which reflashing this dump can resolve. Match the full model and C01 suffix on the panel sticker, save the original EEPROM content first, and write with a suitable programmer or EDID utility.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →